Original price
Rs. 3,341.00
-
Original price
Rs. 3,341.00
Original price
Rs. 3,341.00
Current price
Rs. 2,401.00
Rs. 2,401.00
-
Rs. 2,401.00
Current price
Rs. 2,401.00
| /
UGREEN · SKU 95521
UGREEN HDMI 2.1 Switch 3 In 1 Out, 8K@60Hz 4K@240Hz with Remote, VRR
Connect three HDMI sources to one TV or monitor with the UGREEN 95521. Plug in a PS5, an Xbox and a set-top box or PC, then switch between them from the couch with the included remote or the button on the unit.
This is an HDMI 2.1 switch with 40Gbps bandwidth, so it can pass 8K@60Hz and high-refresh 4K@240Hz, 4K@144Hz and 4K@120Hz signals when your source, cables and display support them. VRR, G-Sync and FreeSync pass-through help keep games smooth, and it is plug and play with no drivers to install.
Key features
HDMI 2.1, 40Gbps
Supports 8K@60Hz, 4K@240Hz/144Hz/120Hz and 1080P@240Hz with compatible devices.
Gaming features
VRR, G-Sync and FreeSync support for smooth, tear-free gameplay.
Remote and button control
Switch sources with the IR remote or the button on the switch.
Plug and play
No drivers or apps needed; connect the cables and power, then choose an input.
Where it fits
Gaming setups
Share one high-refresh TV or monitor between a PS5, Xbox and gaming PC.
Living room
Keep a set-top box, streaming stick and console connected to one TV input.
Work and play desk
Switch a monitor between a work laptop and a console.
Will it work with your setup?
Works with HDMI sources such as consoles, PCs, laptops, set-top boxes, streaming sticks and Blu-ray players, and with HDMI TVs, monitors and projectors.
High resolutions and refresh rates such as 4K@120Hz and above need HDMI 2.1 support on the source, the display and all HDMI cables used.
ARC and eARC are not supported, so connect a soundbar directly to the TV ARC/eARC port.
Setup and everyday use
Connect the switch output to an HDMI input on your TV or monitor.
Connect up to three sources to the HDMI inputs, using HDMI 2.1 (Ultra High Speed) cables for 4K@120Hz and above.
Connect the supplied USB power cable to a USB port or USB adapter and keep it connected while in use.
Select the input you want with the remote or the button on the switch.
If the picture drops, check that each cable is fully seated and supports the resolution and refresh rate you have set.
A closer look
Before you buy
Manual switching only; it does not switch automatically when a device turns on.
Keep the switch connected to USB power when in use. Only a USB power cable is included, not a power adapter.
ARC/eARC is not supported.
Technical specifications
SKU
95521
Ports
3 × HDMI input, 1 × HDMI output
Standard
HDMI 2.1, 40Gbps
Maximum resolution
8K@60Hz
High refresh
4K@240Hz/144Hz/120Hz, 1080P@240Hz
Gaming
VRR, G-Sync, FreeSync
Control
IR remote + button
Power
USB power (cable included)
Inside the box
1 × UGREEN 95521 HDMI 2.1 switch
1 × IR remote
1 × USB power cable
Frequently asked questions
Will my PS5 run at 4K 120Hz through it?
Yes, when the TV supports 4K@120Hz on the input you use and you connect with HDMI 2.1 (Ultra High Speed) cables. Enable 120Hz output in the console settings.
Does it switch automatically?
No. Choose the input with the remote or the button on the switch.
Does it need power?
Yes. Keep the supplied USB power cable connected to a USB port or USB adapter while the switch is in use. A power adapter is not included.
Can I connect my soundbar through it?
ARC and eARC are not supported, so connect the soundbar to the TV ARC/eARC port instead of the switch.
Can I use it with a monitor and a PC?
Yes. It works with HDMI monitors and PCs. For high refresh rates, check the monitor HDMI port supports the rate you want, since some monitors only reach their maximum refresh over DisplayPort.
Why do I get a black screen at 4K 120Hz?
Usually a cable does not support the bandwidth. Use HDMI 2.1 cables on both sides of the switch, reseat all plugs and check the display input supports the signal.
