AV Access U3EX100 High-End USB 3.2 Extender with Zero Latency, up to 100m/330ft over Cat 6a/7, 4x USB 3.0 Ports, Ideal for Gaming & Streaming
Give fast USB devices room to work.
Move supported USB peripherals away from the computer without relying on a long passive USB lead. U3EX100 links a host-side transmitter to a four-port receiver over category cable, keeping cameras, controls or accessories where they are needed.
U3EX100
Know what connects where.
Connection overview. Check the requirements below for the exact ports, cable type and supported operating mode.
Put the peripherals where the job happens
Keep the host computer in a convenient location and position the receiver closer to the connected devices. Up to 100m is the documented reach; device type and cable quality remain part of the installation plan.
Four ports, one shared connection
The receiver provides four USB-A connections. Their devices share the upstream USB link, so the quoted USB 3.2 Gen 1 · 5Gbps is not an independent guaranteed transfer rate for every port. The USB-C transmitter connection carries USB data. One designated receiver port supports up to 1.5A, and USB 2.0 devices are also supported.
Make power part of the design
The receiver uses the supplied 12V/3A power adapter. Use Cat6a / Cat7 F/FTP or U/FTP cable and test the complete set of USB devices before installing the run.
Make sure it fits your setup.
Use the specified shielding
AV Access specifies F/FTP or U/FTP cable. Do not substitute UTP, F/UTP or U/UTP for the documented 100m USB 3.x installation.
USB capability
This extends USB data. It does not add an HDMI display output or USB-C DisplayPort Alt Mode to the computer.
Device and power limits
The receiver uses the supplied 12V/3A power adapter. Check the current requirement of each peripheral and the receiver’s port ratings.
From unboxing to connected.
Plan the link
Match the cable type, total length and required resolution to this model’s limits.
Connect both ends
Put the transmitter at the source and the receiver at the display or USB devices.
Power the kit
Use the power connection specified for this model; then check the link indicators.
Test before installing
Confirm video, sound and any USB/control functions before securing the cable run.
U3EX100 at a glance.
| Model | U3EX100 |
|---|---|
| USB link | USB 3.2 Gen 1 · 5Gbps |
| Remote device ports | 4 × USB-A |
| Distance | Up to 100m |
| Cable requirement | Cat6a / Cat7 F/FTP or U/FTP cable |
| Power | The receiver uses the supplied 12V/3A power adapter. |
| Connection | Point-to-point USB extension |
A little clarity before you buy.
Will this carry HDMI video?
No. It extends USB data. A USB camera may work as a USB peripheral, but there is no HDMI input or output.
Can every USB device run at full speed together?
The connected devices share the upstream link and available power. A camera and storage device can compete for bandwidth.
Can I place it on the office LAN?
No. Run the specified cable directly between its transmitter and receiver.
More product photos
