Original price
Rs. 8,886.00
-
Original price
Rs. 8,886.00
Original price
Rs. 8,886.00
Current price
Rs. 8,322.00
Rs. 8,322.00
-
Rs. 8,322.00
Current price
Rs. 8,322.00
| /
QI2 25W • PHONE + AIRPODS • 45W+ SOURCE
UGREEN 55963 MagFlow 25W 2-in-1 Charger
Overview
UGREEN 55963 is a Qi2-certified foldable magnetic charging stand with one phone charging face and a lower 5W pad for compatible AirPods or other Qi earbud cases. UGREEN lists up to 25W phone charging and up to 5W earbud charging at the same time. Full 25W phone operation has explicit conditions: the exact official page specifies a compatible iPhone 16-series device with iOS 26 or later, a 45W-or-higher adapter, and a 60W-or-higher USB-C cable if the supplied cable is replaced. The wall adapter is not included.
Phone up to 25WEarbuds up to 5W45W+ adapter for full 25W1m USB-C cable included
SKU 55963: Exact-model view: SKU 55963 is a foldable magnetic phone stand with a separate lower Qi charging pad for compatible earbud cases.
Key features
Qi2 25W magnetic face
Precise magnetic alignment and Qi2 certification support up to 25W on compatible hardware under UGREEN's stated software and power conditions.
5W earbud pad
The lower wireless area powers a compatible AirPods or other Qi-enabled earbud charging case while the phone remains attached.
16 magnets / 7N hold
UGREEN lists 16 magnets and up to 7N grip for compatible phones/cases, with portrait and landscape positioning.
ThermalGuard and safeguards
Temperature control plus an eight-layer protection design help manage heat, current, voltage, charging and foreign objects.
SKU 55963: The adjustable magnetic face supports visible portrait or landscape placement while the lower pad remains available for a compatible earbud case.
25W conditions, input and simultaneous use
The 25W figure is phone-side wireless output, not the wall-adapter output. UGREEN's exact instruction requires a compatible iPhone 16-series device running iOS 26 or later and a 45W-or-higher adapter for full 25W operation. Earlier iPhone 12–15 models can attach and charge, but their supported Qi/Qi2 tier is lower and model-dependent.
UGREEN lists up to 25W for the phone plus 5W for earbuds simultaneously. The adapter supplies more power than reaches the phone because the stand also powers its electronics, the second coil and normal wireless-conversion losses. A 45W marketing rating does not mean the phone receives 45W.
The technical field lists a 12V/3A input operating point, while the full-speed setup calls for a 45W+ USB-C adapter that offers the needed profile. The supplied cable is about 1m/3ft. If replacing it, UGREEN requires a cable rated 60W or higher for the full 25W setup.
Phone surface
Up to 25W with the stated compatible phone, software, 45W+ adapter and suitable cable conditions.
Earbud pad
Up to 5W for a compatible Qi wireless-charging case.
Together
UGREEN lists phone up to 25W plus earbuds 5W simultaneously when upstream power and devices support the arrangement.
External source
45W+ USB-C adapter for full 25W phone mode; adapter not included. Listed input operating point: 12V/3A.
SKU 55963: ThermalGuard monitors temperature during wireless charging; heat, device safeguards and multi-device use can still reduce charging speed.
Wireless speed and device-generation expectations
Qi2 certification standardizes magnetic alignment and compatible wireless negotiation, but it does not make every magnetic phone a 25W receiver. UGREEN's specific full-speed condition names iPhone 16 series with iOS 26 or later. Check the receiving phone's own wireless specification and current software before expecting the top tier.
Older compatible iPhone 12–15 models remain useful with the stand but generally operate within their earlier Qi2 or Qi charging limits rather than the newer 25W tier. Newer Qi2.2-capable phones may also be supported, but exact model support should be verified on UGREEN's current compatibility information and the phone maker's specification.
Temperature, alignment, battery percentage and background use can reduce charging speed. A phone near full charge may intentionally slow; this is different from an underpowered adapter or bad alignment. Test with the supplied cable and a compliant 45W+ source before troubleshooting the stand.
SKU 55963: The 25W artwork applies only under the verified device, software, adapter, cable, alignment and temperature conditions explained in this section.
Use scenarios
Full-power desk setup
Pair a supported iPhone/software combination with a separate 45W+ adapter and the included cable.
Phone plus AirPods
Charge a compatible magnetic iPhone and Qi-enabled AirPods case together from one USB-C source.
Travel kit
Fold the reinforced hinge, pack the supplied cable and bring a 45W+ adapter when full 25W operation is required.
SKU 55963: The foldable stand suits a shared desk, cafe or travel workspace when the base is stable and the charging cable cannot be snagged.
Setup and usability guidance
Choose the source: for full 25W phone mode, use a USB-C adapter rated 45W or higher that provides the required profile. The adapter is not included.
Use the cable: start with the supplied 1m USB-C-to-USB-C cable; a substitute should be rated 60W or higher for UGREEN's stated full-power setup.
Open and stabilise: support the base, adjust the hinge within its normal range and leave ventilation around both charging areas.
Add earbuds: place a Qi-enabled case centrally on the lower pad. Remove and re-seat either device if its charging indicator does not remain active.
SKU 55963: Set the base flat, adjust only through the normal 70-to-0-degree tilt range, and rotate a securely attached phone as needed.
Compatible devices and systems
Magnetic fit begins with iPhone 12 and later, but 25W performance is narrower. The phone generation, operating system, case, adapter and cable must all satisfy the relevant tier.
Full 25W reference class
UGREEN's exact page names compatible iPhone 16-series devices with iOS 26 or later, a 45W+ adapter and suitable cable.
iPhone 12–15 series
Magnetic attachment and wireless charging are supported by model, but do not assume the newer 25W tier; use the phone's documented Qi/Qi2 limit.
Cases and accessories
Use a thin, correctly aligned magnetic-compatible case. Remove wallet attachments, cards, metal plates and loose rings before charging.
SKU 55963: The exact chart separates the 25W reference class, earlier iPhone tiers and 5W earbud charging; check each device identifier and software version.
What this product does
Provides Qi2-certified magnetic wireless charging up to 25W under UGREEN's stated compatible conditions.
Folds for travel, adjusts for portrait/landscape use and provides ThermalGuard plus an eight-layer protection design.
SKU 55963: The exact layout can charge a compatible magnetic phone and Qi-enabled earbud case together from one external USB-C power source.
What this product does not do
It does not contain a battery and cannot charge devices without an external power source.
It does not guarantee 25W to every iPhone 12-and-later model, every case or every software version.
What to do
Use a capable USB-C power source: the wall adapter and cable must supply the input requested by the charger; the phone will still negotiate its own safe receiving level.
Start with clean alignment: centre the phone on the magnetic charging face and place the earbud case squarely over the lower coil before checking the charge indicator.
Use the supplied cable first: it removes one variable from full-power setup; replacements should meet UGREEN's 60W-or-higher instruction.
What not to do
Do not place metal between coils: coins, keys, magnetic plates, cards and metal case parts can interfere with charging and may heat up.
Do not force the hinge: adjust only through its normal travel and support the base while changing the viewing angle.
Do not assume a 30W adapter is enough: UGREEN specifically calls for 45W or higher for full 25W phone charging on SKU 55963.
Warnings and limitations
No internal battery: this is a powered charging stand, not a portable energy bank. It works only while connected to a compatible external USB-C power source.
Wireless heat is expected within limits: the phone, case and charging surface may feel warm. Charging can slow or pause as the devices protect themselves; disconnect if heat is excessive or abnormal.
Magnetic hold is not impact protection: the listed 7N force assumes compatible alignment. Support the phone when adjusting the stand and do not suspend it over fragile objects.
SKU 55963: Protection systems assist correct use but cannot make blocked ventilation, metal foreign objects or damaged cables safe.
Technical specifications
Brand / model / SKU
UGREEN / MagFlow UL55963 / 55963
Product type
Qi2-certified foldable 2-in-1 magnetic wireless charging stand
Internal battery
None; continuous external USB-C power is required
Phone wireless output
Up to 25W under stated compatible device/software/source conditions
Earbud wireless output
Up to 5W for compatible Qi charging cases
Simultaneous output
Phone up to 25W + earbuds 5W, with a suitable upstream source
Full 25W requirement
Compatible iPhone 16-series device with iOS 26 or later; 45W+ adapter; suitable cable
Input connector / listed point
USB-C; 12V/3A operating point listed in official technical fields
Replacement-cable requirement
60W or higher for the stated full-power setup
Wireless standard
Qi2 certified; compatible device tier varies by model
Magnetic system
16 magnets; up to 7N listed gripping force
Stand function
Foldable and adjustable, approximately 70° range in official product material; portrait/landscape
Safety design
ThermalGuard temperature control and eight-layer protection including abnormal-current/voltage/heat safeguards
India listing box dimensions
17 × 10 × 3cm; not bare-product dimensions
India listing packaged weight
284g; not represented as confirmed bare-charger weight
Colour
Grey
Package contents
1 × UGREEN 55963 MagFlow 2-in-1 magnetic wireless charger
1 × approximately 1m / 3ft USB-C to USB-C cable
1 × user manual
A wall adapter is not included. For UGREEN's full 25W phone mode, provide a 45W-or-higher compatible USB-C adapter; if replacing the supplied cable, use one rated 60W or higher.
Placement, cable and travel checklist
Fold the hinge before packing, protect both coil surfaces from grit and route the USB-C cable so it cannot pull the stand over. Disconnect external power before cleaning and use a dry soft cloth. This charger contains no internal battery, but any wall adapter or separate power bank in the travel kit has its own rules.
For repeatable troubleshooting, begin with the supplied cable and a known compatible 45W+ adapter, then test the phone alone, earbud case alone and both together. This separates upstream-power issues from device alignment or case interference.
Verify software and device charging limits after major phone updates before diagnosing a speed change.
SKU 55963: For the full verified setup, UGREEN calls for a compatible 45W-or-higher USB-C adapter and a 60W-or-higher cable; the wall adapter is not included.
Product-specific FAQ
Is a 45W adapter included?
No. UGREEN requires a compatible 45W-or-higher adapter for the stated full 25W phone mode, but the wall adapter is not in the package.
Does the phone receive 45W?
No. The adapter provides upstream capacity. The phone-side wireless ceiling is up to 25W, with the balance covering the second coil, electronics and conversion loss.
Which phones can receive the full 25W?
UGREEN's exact page names a compatible iPhone 16-series device with iOS 26 or later. Other models use their own supported Qi/Qi2 tier.
Can iPhone 12 through 15 use the stand?
Yes, compatible models can attach and charge, but do not assume the 25W tier. Their maximum depends on model, software and Qi/Qi2 capability.
Can it charge AirPods at the same time?
Yes, a compatible Qi-enabled AirPods case can use the lower pad at up to 5W while the phone charges. Check the case itself for wireless support.
Are any AirPods cases excluded?
UGREEN's compatibility table excludes case identifiers A1602 from 2017 and A2897 from 2022. Check the identifier on the exact case before purchase.
What cable is included?
A USB-C-to-USB-C cable about 1m/3ft is included. If replacing it for full-power use, UGREEN specifies a cable rated 60W or higher.
What input does the charger list?
The official technical field lists 12V/3A, while UGREEN calls for a 45W+ USB-C adapter for the complete full-power setup.
Can it charge an Apple Watch?
No Apple Watch coil is documented. The two charging areas are for a compatible magnetic phone and a Qi wireless earbud case.
Why does the phone charge below 25W?
Device generation, software, battery percentage, temperature, case, alignment, adapter profile and cable can all reduce the negotiated result.
Is this a portable power bank?
No. It folds for travel but contains no battery; it must remain connected to an external USB-C power source.
