UGREEN LP962 MagSafe-Compatible Magnetic Phone Tripod & Handheld Grip – 1/4″-20 (75509)
A pocket-sized magnetic phone support for viewing, calls and content creation
The UGREEN LP962 combines a MagSafe-compatible magnetic phone mount, foldable mini tripod, compact desk stand and handheld filming grip in one travel-friendly design. Twenty N52 magnets provide quick attachment for compatible phones, while its aluminium-alloy structure, adjustable joints and integrated 1/4″-20 mounting interface support a wide variety of viewing and shooting setups.
What it does well.
One compact accessory, several ways to use it
Mini tripod. Open the three legs and place it on a stable surface for group photos, video recording or hands-free calls.
Handheld grip. Fold the legs together to create a compact handle for selfies, vlogging and handheld filming.
Desk stand. Partially unfold the structure for video calls, content viewing, timers and daily desk use.
Tripod phone mount. Use the 1/4″-20 interface with compatible tripods and photography-support equipment.
Quick hands-free setup wherever you go
Open the legs, position the magnetic head and attach a compatible phone. The lightweight structure makes it useful for travel, outdoor recording, online meetings, casual livestreams and situations where carrying a full-size phone tripod is inconvenient.
Folds down for convenient everyday carry
The legs fold together beneath the phone support, creating a compact unit approximately 11.5 cm long. At around 118 g, it can be carried in a handbag, backpack, camera bag or suitable pocket.
This is a compact handheld grip rather than a telescopic selfie stick. It does not extend like a full-length monopod.
Twenty N52 magnets for quick snap-on attachment
The circular mounting surface contains 20 N52 magnets arranged to align with the magnetic ring in a compatible iPhone or MagSafe-compatible case. This enables quick attachment without opening a mechanical phone clamp.
Actual holding performance depends on correct alignment, phone weight, case thickness, case quality and whether the included metal ring has been installed correctly.
Connect it to compatible photography equipment
The integrated 1/4″-20 mounting system allows the magnetic phone holder to be installed on compatible camera tripods, tripod heads and other photography supports using the supplied mounting screw.
The full-size tripod shown in the image is for demonstration only and is not included. Confirm thread compatibility and secure the connection before attaching a phone.
MagSafe-compatible and adaptable to other phones
Direct magnetic attachment.
Using the included adhesive ring.
Case-material warning: The adhesive ring may not bond reliably to silicone, leather, fabric, textured, curved or dirty surfaces. For a phone used with a case, attach the ring centrally to the outside of a compatible case.
- MagSafe-compatible iPhone 12 series and later
- MagSafe-compatible phone cases
- Cases with a correctly aligned built-in magnetic ring
- Earlier non-MagSafe iPhones
- Compatible Android smartphones
- Suitable smooth TPU, PC or hard-plastic phone cases
Useful for work, travel and everyday content
- Travel and group photographs
- Vlogging and short-form videos
- Online meetings and video calls
- Desk viewing and streaming
- Cooking and tutorial recordings
- Time-lapse and stationary shots
- Handheld selfies
- Mounting on compatible camera tripods
Configure different viewing and shooting angles
The foldable structure combines an adjustable magnetic mounting arm with independently unfolding support legs. The product gallery identifies up to approximately 206° of magnetic-head adjustment, approximately 100° of tripod-leg movement and approximately 92° of support-arm adjustment.
A magnetically attached phone can also be positioned in portrait or landscape orientation. Adjust the joints carefully and do not force them beyond their intended movement range.
Important: this product does not wirelessly charge your phone
The magnetic ring is used only to hold and position the phone. The LP962 does not contain a charging coil, battery, charging port or wireless-charging electronics. A separate compatible cable and charger are required when charging the mounted phone.
How to use it
- Select the mode: Open the three legs for tripod use, partially unfold them for desk use, or keep them folded together for handheld use.
- Position the magnetic head: Adjust the support arm to the required viewing or shooting angle.
- Attach a MagSafe-compatible phone: Centre the phone or compatible magnetic case over the circular mounting surface.
- For a non-magnetic phone: Clean and dry the outside of a suitable case, install the included adhesive metal ring centrally and allow the adhesive to bond fully before use.
- Check the hold: Support the phone while gently testing the magnetic attachment.
- Check stability: When using tripod or desk mode, place the stand on a firm, level surface and fully confirm its balance before releasing the phone.
Safe-use guidance
- Use tripod mode only on a firm, flat and stable surface.
- Keep the stand away from table edges, strong wind, vibration and unstable ground.
- Support the phone when making major angle adjustments.
- Do not use the holder for vigorous action filming without an appropriate secondary safety system.
- Confirm that the magnetic ring or case remains firmly attached before every use.
- Do not suspend the phone over people, valuables or areas where a fall could cause injury or damage.
- Keep magnetic-stripe cards and other magnet-sensitive items away from the magnetic head.
- Users of implanted medical devices should follow the device manufacturer’s magnetic-accessory guidance.
Frequently asked questions
Is this a complete mini tripod or only a phone adapter?. It is a complete foldable mini tripod, desk stand and handheld grip. It also includes a 1/4″-20 interface for use with compatible external photography equipment.
Can I use it directly with a MagSafe-compatible iPhone?. Yes. A MagSafe-compatible iPhone or compatible magnetic case can attach directly to the circular magnetic surface.
Can it hold an Android phone?. Yes, provided a compatible magnetic case or the included adhesive metal ring is installed correctly on a suitable smooth case.
Does it include a Bluetooth camera remote?. No. Use the phone’s timer, gesture control, voice command or a separately purchased compatible Bluetooth shutter remote.
Does the handle extend like a telescopic selfie stick?. No. It is a compact folding handheld grip and does not contain a telescopic extension pole.
Can I attach it to a standard camera tripod?. It can connect to compatible photography supports using its 1/4″-20 mounting system. Confirm the equipment’s thread and load compatibility before use.
Does the magnetic ring charge the phone?. No. The magnetic system only holds the phone; it does not provide wired or wireless charging.
Can the included ring be attached to any case?. It is best suited to clean, smooth TPU, PC or hard-plastic surfaces. Silicone, leather, fabric, textured and uneven cases may not provide reliable adhesion.
Is it suitable for outdoor filming?. It can be used outdoors on a firm, level surface in calm conditions. Avoid strong wind, unstable ground, vibration and locations where the phone could be damaged if it falls.
At a glance.
- Brand
- UGREEN
- Model
- LP962
- SKU / manufacturer reference
- 75509
- GTIN / EAN
- 6941876275090
- Product type
- Magnetic phone tripod, desk stand and handheld grip
- Magnetic system
- 20 × N52 magnets
- Phone orientation
- Portrait or landscape
- Magnetic-head adjustment
- Up to approximately 206°
- Tripod-leg adjustment
- Up to approximately 100°
- Support-arm adjustment
- Up to approximately 92°
- External tripod interface
- Standard 1/4″-20 mounting system
- Folded length
- Approximately 11.5 cm
- Product weight
- Approximately 118 g
- Primary material
- Aluminium alloy with silicone contact surfaces
- Colour
- Grey
- Bluetooth shutter remote
- Not included
- Telescopic extension
- No
- Wireless charging
- No
- In the box
- 1 × UGREEN LP962 Magnetic Phone Tripod and Handheld Grip
1 × Adhesive metal ring for a suitable non-magnetic phone or case
1 × 1/4″-20 mounting screw/interface accessory
Phone, full-size camera tripod, Bluetooth remote, charging cable and charger are shown or referenced for demonstration and are not included.
- Genuine UGREEN product
- GST invoice available with eligible orders
- Covered by our applicable India warranty policy
- India-based order and product support