UGREEN Revodok 107 60515 7-in-1 USB-C Hub, 4K60 and Gigabit
Overview
UGREEN 60515 is a single-display travel hub combining 4k60 hdmi, gigabit ethernet, cards, usb-a and pd input.
What it does well.
Key features
At a glance
4K60 HDMI. Up to 4K60 requires a DP 1.4-capable USB-C host plus suitable HDMI cable and display.
Gigabit Ethernet. Two USB-A ports are up to 5Gbps, sharing the host link with cards, Ethernet and video.
SD + TF. PD accepts up to 100W input.
100W PD input. Hybrid-work desk with one monitor
Every connection explained
Port-by-port clarity
HDMI 2.0. One display up to 4K60; DP 1.4 host capability is required for the maximum.
2 × USB-A 3.0. Up to 5Gbps data.
RJ45 Ethernet. 10/100/1000Mbps.
SD + TF/microSD. Two card slots, current gallery advertises up to 104MB/s.
USB-C PD input. Up to 100W input; not a data port.
Integrated USB-C host lead. Requires a full-function USB-C host for video.
Resolution, topology and host limits
Display planning
Up to 4K60 requires a DP 1.4-capable USB-C host plus suitable HDMI cable and display.
A DP 1.2 or lower-capability host can negotiate a lower resolution or refresh rate.
Only one HDMI output is present. The hub supports one external desktop, mirrored or extended according to the host.
The hub does not use DisplayLink and cannot add video to a data-only USB-C port.
USB, card and network performance
Shared resources
Two USB-A ports are up to 5Gbps, sharing the host link with cards, Ethernet and video.
SD and TF are advertised up to 104MB/s; current material does not safely establish an independent simultaneous maximum.
Gigabit Ethernet requires a Gigabit router/switch, suitable cable and network service.
Use scenarios
Real-world applications
Hybrid-work desk with one monitor. A practical fit when the ports, display topology, bandwidth and power limits above match the host and peripherals.
Travel Ethernet and presentation hub. A practical fit when the ports, display topology, bandwidth and power limits above match the host and peripherals.
Camera-card import workflow. A practical fit when the ports, display topology, bandwidth and power limits above match the host and peripherals.
Steam Deck or tablet expansion where supported. A practical fit when the ports, display topology, bandwidth and power limits above match the host and peripherals.
Setup and usability guidance
Practical connection order
- Confirm this SKU on the product or invoice.
- Check the host port for required video, data and charging roles.
- Place the hub/dock on a stable, open surface; place stand models before loading a device.
- Connect required external power before the host when the model requires or benefits from it.
- Connect the host using the marked upstream lead or port.
- Attach one display first and confirm a stable picture before adding others.
- Add Ethernet, storage, cards and low-speed peripherals one group at a time.
- Configure display arrangement, resolution and refresh in the operating system.
- Eject storage/cards before unplugging; disconnect high-power accessories before packing.
Compatible devices and systems
Host and peripheral fit
Full-function USB-C laptops with DP Alt Mode. Compatibility means only the functions exposed by the specific host port and operating system; connector shape is not enough.
MacBook, Windows and Chromebook systems with compatible ports. Compatibility means only the functions exposed by the specific host port and operating system; connector shape is not enough.
USB-C tablets/phones with supported display/OTG roles. Compatibility means only the functions exposed by the specific host port and operating system; connector shape is not enough.
Steam Deck and similar handhelds within their power/display limits. Compatibility means only the functions exposed by the specific host port and operating system; connector shape is not enough.
What this product does
Function scope
- Adds one HDMI display up to 4K60
- Adds two 5Gbps USB-A ports and Gigabit Ethernet
- Reads SD and TF/microSD cards
- Accepts up to 100W PD input
What this product does not do
Boundaries
- It does not have USB-C data, audio, DisplayPort or VGA.
- It cannot provide two external displays.
- It does not guarantee an 85W or 95W host output across conflicting regional material.
- It does not turn a data-only USB-C port into video.
What to do
Recommended practice
- Match the SKU before ordering.
- Use qualified display, Ethernet and USB-C cables.
- Connect external power when specified or when bus-powered storage is unstable.
- Keep firmware, OS and relevant drivers current.
- Test the simplest connection first, then add devices.
What not to do
Avoid common mistakes
- Do not assume every USB-C port carries video, data and power.
- Do not add individual port maxima to claim an aggregate throughput.
- Do not cover the hub or place it on heat-trapping fabric.
- Do not remove storage/cards during writes.
- Do not force connectors, stand hinges or devices that do not fit.
Warnings and limitations
Read before use
Warning / limitation 1. Confirm DP 1.4 when 4K60 is essential.
Warning / limitation 2. Do not advertise a precise host-wattage ceiling until the India pack/documentation resolves the official 85W/95W conflict.
Warning / limitation 3. Keep the hub ventilated; warmth is normal during HDMI, Ethernet and charging.
Warning / limitation 4. Eject cards and storage before disconnecting.
At a glance.
- Model
- Revodok 107 / SKU 60515
- HDMI
- 1 × HDMI 2.0, up to 4K60
- USB-A
- 2 × up to 5Gbps
- Network
- Gigabit Ethernet
- Cards
- SD + TF/microSD, up to 104MB/s advertised
- PD input
- Up to 100W; host output below input
- Dimensions
- Approximately 110 × 195 × 17.5mm as listed
- Listed weight
- Approximately 119.6g
- Host requirement
- USB-C DP Alt Mode; DP 1.4 for 4K60
- Bandwidth rule
- All downstream functions share the upstream host connection
- Maximums
- Require compatible host, cables, peripherals, displays and software
Model-specific data
Power path
PD accepts up to 100W input.
Official regional material conflicts on the post-overhead host ceiling (85W versus 95W). This page deliberately states only that host delivery is below 100W and negotiated by the system.
A wall charger and charging cable are not part of the base hub unless sold as a bundle.
Questions buyers ask.
What model is this?
This guide is for UGREEN 60515 only. Similar UGREEN hubs and docks can use different video, data and charging controllers.
What must my USB-C host support?
Use a host that supports the connection and operating-system capabilities stated in this model guide.
Can every port reach its maximum at the same time?
No. Displays, USB storage, cards and Ethernet share the upstream host link and available power. Individual port labels are ceilings, not simultaneous aggregate guarantees.
Will it charge my laptop or handheld?
PD accepts up to 100W input. Official regional material conflicts on the post-overhead host ceiling (85W versus 95W). This page deliberately states only that host delivery is below 100W and negotiated by the system.
Is the wall charger included?
No wall charger is listed in the base package unless your retailer explicitly sells a charger bundle.
Does it support an external display?
Up to 4K60 requires a DP 1.4-capable USB-C host plus suitable HDMI cable and display. A DP 1.2 or lower-capability host can negotiate a lower resolution or refresh rate.
Can I use it with a Mac?
MacBook, Windows and Chromebook systems with compatible ports
Is driver installation required?
The native USB/DP Alt Mode functions are designed to be plug-and-play. Keep the operating system, GPU, USB/Thunderbolt and network drivers current. No DisplayLink claim is made unless explicitly stated.
Is it normal for the hub to become warm?
Some warmth is normal when converting video, network, data and power in a compact enclosure. Keep it uncovered and disconnect it if heat becomes abnormal or operation unstable.
What should I check if a display is blank?
Confirm DP Alt Mode, reconnect power where required, use a qualified display cable, select the correct monitor input, lower resolution/refresh, and update host graphics/USB drivers.
Can I disconnect it while copying files?
Stop transfers and safely eject storage or cards first. Removing the hub during a write can corrupt open files or the filesystem.