UGREEN 4-Port USB 3.0 Hub 5V Micro USB Power MacBook Mac Pro Mini iMac Surface XPS IdeaPad MateBook USB Flash Drive (50985)
Overview
The attached USB-A host cable connects directly to a desktop, laptop or other compatible USB host. Four downstream USB-A ports provide a simple way to attach storage, keyboards, mice, receivers and other standard USB peripherals.
What it does well.
Key features
At a glance
Connections and signal roles
Port-by-port clarity
USB-A host lead. Connects to a standard USB-A host port on a compatible computer or console.
Four USB-A 3.0 ports. Connect storage and peripherals at up to 5Gbps theoretical.
5V micro-USB input. Provides optional hub-side power for connected devices; no host charging.
Shared USB link. All downstream ports share the bandwidth and power of one upstream connection.
Keep four everyday peripherals connected
USB-A EXPANSION
The four downstream ports reduce cable swapping for storage, input devices, printers, controllers and other compatible USB accessories.
USB 3.0 is backward-compatible, but each device runs at its own negotiated rate and active devices share the single host link.
- Four USB-A data ports
- Up to 5Gbps theoretical
- Backward-compatible USB support
- No display output
Support bus-powered devices with a separate 5V input
AUXILIARY POWER
Connect a suitable 5V micro-USB source when several peripherals or a portable drive need more power than the host port reliably provides.
The input supports the hub side only. It is not a phone charger, laptop charger or fast-charging output.
- 5V micro-USB input
- Peripheral-side support power
- No host charging
- Power source not confirmed included
Use scenarios
Real-world applications
Choose this exact model when its verified connections and limits match the workflow below.
Desktop cable management. Keep keyboard, mouse, receiver and printer attached through one host port.
Laptop USB expansion. Add four familiar USB-A connections to a compatible USB-A laptop.
External storage. Connect flash drives or portable storage within shared power and bandwidth limits.
Console accessories. Use compatible USB data peripherals with a console that supports standard USB hubs.
Setup and usability guidance
Practical connection order
A deliberate connection order makes capability checks and troubleshooting easier.
- Connect the attached USB-A plug to a compatible host port.
- Connect a low-power peripheral first and verify detection.
- Add remaining peripherals one at a time.
- If a drive is unstable, connect a suitable 5V micro-USB source.
- Allow the operating system to install any peripheral-specific driver.
- Safely eject storage before disconnecting it.
- Unplug the hub if a cable or connector is damaged.
Compatible devices and systems
Host and peripheral fit
Connector shape alone is not enough: the host port, operating system, cable, display and peripheral must support the required function.
USB-A Windows PCs. Works with standard USB data ports and supported peripheral drivers.
macOS and Linux computers. Basic hub functions are generally plug and play on compatible USB-A hosts.
Consoles and other hosts. Accessory support depends on the host platform and the specific connected device.
Phones and tablets. Require a separate compatible OTG adapter and host support; no adapter is included or assumed.
What this product does
Verified function scope
- Adds four USB-A data ports to one USB-A host.
- Supports theoretical USB 3.0 rates up to 5Gbps.
- Works with backward-compatible USB devices at their negotiated rates.
- Accepts optional 5V auxiliary power for the hub and peripherals.
What this product does not do
Boundaries that prevent a mismatch
- It does not output video to a monitor, television or projector.
- It does not charge the host computer.
- It does not provide an express-charging promise for phones or tablets.
- It does not include USB-C downstream data ports.
- It does not give each port independent 5Gbps bandwidth.
What to do
Recommended practice
- Use auxiliary power for demanding multi-device loads.
- Use healthy USB cables and peripherals.
- Keep the hub uncovered during sustained transfers.
- Back up important files before copying them.
- Test devices individually when diagnosing a fault.
What not to do
Avoid common mistakes
- Do not connect a display expecting a picture.
- Do not use the hub as a general charger.
- Do not unplug storage during a write.
- Do not exceed the available host and auxiliary power budget.
- Do not force or sharply bend connectors.
Warnings and limitations
Read before use
Check before connecting or ordering.
Warning / limitation 1. Removing a drive during a write can corrupt files.
Warning / limitation 2. Actual throughput depends on shared bandwidth and the slowest connected component.
Warning / limitation 3. Some consoles and mobile devices restrict supported USB accessories.
Warning / limitation 4. A high-power drive may require auxiliary power and can still exceed the available budget.
Warning / limitation 5. Disconnect the hub if it or a connector becomes unusually hot or damaged.
- Confirm the device has a USB-A host port or a suitable data-capable adapter.
- Do not expect video output to a TV, monitor or projector.
- Do not expect phone, tablet or laptop charging.
- Check the combined power needs of attached peripherals.
- Select a suitable 5V micro-USB source separately if needed.
- Remember that four devices share one 5Gbps host link.
- Confirm console or mobile support for the exact accessory.
At a glance.
- Brand
- UGREEN
- SKU
- 50985
- Product type
- 4-port USB 3.0 hub
- Host connection
- Attached USB-A male lead
- Downstream ports
- 4 × USB-A 3.0
- Maximum data rate
- Up to 5Gbps theoretical; shared
- Backward compatibility
- USB 2.0 and USB 1.1
- Auxiliary input
- 5V micro-USB power input
- Host charging
- Not supported
- Device charging
- No express-charging function claimed
- Video output
- Not supported
- Ethernet
- Not included
- Installation
- Plug and play for basic hub functions on compatible systems
- In the box
- 1 × UGREEN 50985 four-port USB hub with attached USB-A host cable
Model-specific data
Verified in-box information
A 5V micro-USB power adapter and cable are not confirmed as included. Add a suitable source separately only when peripherals require auxiliary power.
Questions buyers ask.
What host connector does it use?
The attached upstream connector is USB-A, not USB-C.
How many ports does it add?
It adds four downstream USB-A 3.0 data ports.
Can every port reach 5Gbps at once?
No. 5Gbps is the theoretical shared link rate; devices divide the upstream bandwidth.
Can it send video to a television or projector?
No. This is a data-only USB hub and has no display output.
Can it charge my laptop?
No. The auxiliary micro-USB input does not send charging power to the host.
Can it fast-charge a phone?
No express-charging function is supported or promised for the downstream ports.
What is the micro-USB input for?
It accepts a suitable 5V source to support the hub and attached peripherals.
Is a power source included?
It is not confirmed as included, so plan one separately only if the peripheral load requires it.
Will USB 2.0 devices work?
Yes. They are backward-compatible and operate at their own lower rate.
Can a phone use this hub?
Only with a separate compatible OTG adapter and host support; no adapter is included.
Why does a drive disconnect?
The device may need more power than the host supplies. Reduce the load or add suitable 5V auxiliary power.