UGREEN MagFlow Qi2 25W 3-in-1 Magnetic Charger (55676)
Overview
UGREEN MagFlow 55676 is a desktop charging station for a compatible magnetic iPhone, wireless-charging AirPods case and Apple Watch. Its phone module supports Qi2.2 charging up to 25W and is backward compatible with Qi2 15W, while the earbuds and watch areas each provide up to 5W. The magnetic phone platform tilts up to 70° and rotates through 360°, allowing portrait or landscape viewing while the reinforced metal base keeps the stand planted on a desk or bedside surface.
- Qi2.2 25W • 3-in-1 • Adjustable stand
- Qi2.2 up to 25W
- Phone + earbuds + watch
- 70° tilt / 360° turn
- 45W adapter included
What it does well.
Maximum phone speed depends on the phone and software
Up to 25W requires a compatible Qi2 25W phone, current supported software and the supplied 45W power input. Earlier Qi2-compatible iPhones can charge at up to their supported 15W level. Magnetic fit and actual rate can change with cases, alignment, heat and battery state.
Key features
- Three dedicated wireless areas charge a magnetic iPhone, compatible earbuds case and Apple Watch together.
- Qi2.2 phone module supports up to 25W and remains backward compatible with the Qi2 15W profile.
- Phone platform tilts to 70° and rotates 360° for portrait, landscape, calls and viewing.
- Earbuds and watch modules each provide up to 5W; total system output is listed up to 35W.
- Stable metal base, foreign-object detection and thermal, short-circuit and over-current protections support regular desk use.
- An auxiliary USB-C2 output is listed at up to 10W for a compatible wired accessory.
Use scenarios
Create one organised overnight charging station for an iPhone, Apple Watch and wireless AirPods case.
Keep the phone upright in portrait for notifications or rotate to landscape for video while it charges.
Reduce separate power adapters and loose cables on a home-office or reception desk.
Use the auxiliary USB-C2 output for a small compatible wired accessory when the full system power budget allows.
Setup and usability guidance
Connect the included 45W PD adapter to mains and use the included 1m 3A USB-C cable with the stand's USB-C1 input.
Place the compatible magnetic iPhone centrally on the raised phone pad and rotate it to the preferred orientation.
Place a compatible wireless-charging AirPods case flat and centred on the earbuds area.
Seat the Apple Watch on its dedicated charging surface and confirm charging on each device screen.
Remove thick, metal-backed or poorly aligned cases if charging is intermittent, slow or unusually warm.
Compatible devices and systems
- Phone: the supported list covers magnetic iPhone 12 through iPhone 16 families; confirm Qi2 and magnetic compatibility for later devices.
- Earbuds: compatible wireless-charging AirPods 2, AirPods 3, AirPods Pro and AirPods Pro 2 cases; excluded case models are A1602 and A2897.
- Watch: the supported list names Apple Watch Ultra, Series 2–8 and SE. Confirm compatibility before relying on later watch generations.
- A case must be MagSafe/Qi2-compatible and thin enough for secure alignment. Non-magnetic devices may not attach safely.
How real-world performance is decided
Advertised maximums describe what the product can support under a compatible setup; they are not a promise of constant power or speed. The connected source, cable or adapter, receiving device, active ports, software, battery state and temperature can each set a lower operating limit.
For this model, the practical starting point is: Qi2.2 up to 25W • Phone + earbuds + watch • 70° tilt / 360° turn • 45W adapter included. Confirm the required connector and use the specifications below when planning the complete signal or charging path.
Check before buying
Phone: the supported list covers magnetic iPhone 12 through iPhone 16 families; confirm Qi2 and magnetic compatibility for later devices.
It does not contain a battery or charge devices away from mains power.
Wireless charging normally produces some warmth; output can reduce automatically when temperature rises.
1 × User manual
Warnings and limitations
- Wireless charging normally produces some warmth; output can reduce automatically when temperature rises.
- Foreign objects, thick cases and incorrect alignment may stop charging or increase heat.
- The listed 25W phone maximum requires compatible Qi2.2 hardware, suitable software and adequate input power.
- Check the AirPods case model: A1602 and A2897 are excluded.
- Disconnect the unit if the stand, cable or adapter is damaged, smells unusual or becomes excessively hot.
UGREEN 55676 at a glance
Choose this product when its connectors, power or data capability, physical format and stated limitations match the intended setup.
At a glance.
- Brand / SKU
- UGREEN MagFlow / 55676
- Product type
- 3-in-1 magnetic wireless desktop charger
- Phone module
- Qi2.2 up to 25W; backward compatible with Qi2 15W
- Earbuds module
- Up to 5W
- Apple Watch module
- Up to 5W
- Auxiliary USB-C2 output
- 5V/2A, up to 10W
- Total listed output
- Up to 35W
- Power input
- USB-C1: 9V/3A, 12V/3A or 15V/3A
- Adjustment
- Up to 70° tilt and 360° rotation
- Magnetic attraction
- Approximately 7N as listed
- Protection
- Over-temperature, foreign-object, short-circuit and over-current
- Colour
- Space grey
- In the box
- 1 × UGREEN MagFlow 55676 3-in-1 charging stand
1 × 45W USB-C PD power adapter
1 × 1m 3A USB-C to USB-C power cable
1 × User manual
Questions buyers ask.
Will every iPhone charge at 25W?
No. Twenty-five watts requires a compatible Qi2.2 / Qi2 25W phone, supported software and adequate power input. Earlier Qi2 iPhones charge at up to their supported 15W level.
Can it charge three devices together?
Yes. It has dedicated areas for a compatible magnetic iPhone, wireless-charging earbuds case and Apple Watch. Available power is managed across the system.
Is the 45W adapter included?
Yes. SKU 55676 includes a 45W PD adapter and a 1m 3A USB-C to USB-C cable.
Which AirPods cases are excluded?
The supported-device table specifically excludes models A1602 and A2897. Check the model printed in the case settings or enclosure before purchase.
Does it work through a phone case?
Use a thin MagSafe/Qi2-compatible magnetic case. Thick, metal-backed or non-magnetic cases can weaken attachment, disrupt alignment and reduce charging.
Can the phone rotate to landscape?
Yes. The magnetic platform offers full 360° rotation and up to 70° tilt for portrait or landscape viewing.
Does it charge Samsung or other Android phones?
Only use a phone that explicitly supports the required Qi2 magnetic alignment and charging profile. Generic Qi support alone does not guarantee a secure elevated magnetic fit or 25W speed.
What is the extra USB-C2 port for?
It is specified as a wired output up to 5V/2A, 10W. It is suitable for a compatible low-power accessory, not a laptop.
Is warmth during charging normal?
Moderate warmth can occur during wireless and multi-device charging. Keep the unit ventilated; remove cases or foreign objects and disconnect if heat is excessive.
Can it be used as a power bank?
No. It has no internal battery and requires connection to its power adapter during use.