UGREEN MagFlow 2-in-1 Magnetic Wireless Charging Stand, 15W Max – 90668
Charge Your iPhone and AirPods in One Organised Space
Replace separate charging pads and loose cables with a stylish 2-in-1 magnetic wireless charging stand. Snap a compatible iPhone into position, place a Qi-enabled AirPods case on the base and keep both devices visible and ready.
- 2-in-1 Charging
- 7.5W for iPhone
- 5W Earbud Pad
- 360° Phone Rotation
What it does well.
Important Charging-Speed Information
- Compatible iPhone: up to 7.5W wireless charging.
- AirPods or compatible Qi earbud case: up to 5W.
- Other compatible Qi smartphones: up to 15W, depending on the phone and charging protocol.
- This is not a Qi2 charger. It does not provide 15W or 25W Qi2 charging to an iPhone.
- Power adapter not included: use a compatible USB-C PD adapter rated at 25W or higher for best dual-device performance.
Less Cable Clutter, More Everyday Convenience
The raised magnetic charger keeps your iPhone visible while it charges, while the charging area in the base is reserved for compatible wireless-charging earbuds. It is well suited to work desks, bedside tables, reception counters and home-office setups.
Two Devices Together. Charge a compatible iPhone and a Qi-enabled AirPods or earbud case at the same time.
Magnetic Alignment. The magnetic ring automatically aligns compatible phones with the upper charging coil.
Adjustable Viewing. Rotate between portrait and landscape or tilt the phone for calls, videos and notifications.
Charging Status LED. A green indicator helps communicate power, earbud charging and abnormal charging conditions.
Two Dedicated Wireless Charging Areas
Upper Magnetic Charger
For Smartphones.
Base Charging Pad
For Wireless Earbud Cases.
- Up to 7.5W for compatible iPhones
- Up to 15W for selected compatible Qi phones
- Magnetic case required for phones without built-in compatible magnets
- Up to 5W wireless charging
- Designed for AirPods cases that support Qi charging
- Also supports selected Qi-enabled earbud cases
Firm, Accurate Magnetic Alignment
Eight N52H magnets provide up to approximately 700g of magnetic holding force, helping a compatible phone snap into the charging position and remain stable during normal desk or bedside use.
Automatic alignment Positions the phone over the charging coil more accurately than manual placement.
Stable attachment Keeps the phone raised and visible during routine interaction.
Case-friendly setup Works best with a bare compatible iPhone or a properly aligned MagSafe-compatible case.
Phone Case Compatibility
For the strongest attachment and most reliable charging, use a compatible iPhone without a case or with a MagSafe-compatible magnetic case.
- Ordinary thick or non-magnetic cases can weaken the magnetic hold and reduce charging efficiency.
- Android and other Qi-enabled phones require a compatible magnetic charging case or correctly positioned magnetic ring.
- Remove wallets, credit cards, key cards, metal plates, pop grips and magnetic accessories before charging.
- iPhone 16e does not have a built-in MagSafe magnet array and requires a compatible magnetic case for attachment.
Adjust the Phone to Suit Your View
The aluminium-alloy ball joint and rotating magnetic ring allow the phone to be repositioned without removing it from the stand.
Portrait orientation Useful for calls, notifications, messaging, reading and standby displays.
Landscape orientation Convenient for watching videos, video calls and wider screen content.
Adjustable tilt Reduce glare and position the screen for a more comfortable viewing angle.
Made for Desks and Bedside Tables
The elevated phone position allows you to see incoming calls, alarms, notifications and supported standby information while charging. The compact base keeps the setup organised without occupying the space required by two separate wireless chargers.
Device Compatibility
Compatible iPhones. Designed for magnetically attaching compatible models in the:
Compatible Earbuds. Suitable for AirPods and other earbud cases that specifically support Qi wireless charging, including selected:
Not an Apple Watch charger Neither charging area contains an Apple Watch charging module. An Apple Watch cannot be charged on this stand.
- iPhone 17 series
- iPhone 16 series
- iPhone 15 series
- iPhone 14 series
- iPhone 13 series
- iPhone 12 series
- AirPods Pro wireless-charging cases
- AirPods 2 or 3 wireless-charging cases
- AirPods 4 ANC wireless-charging case
- Other correctly sized Qi earbud cases
Use the Right USB-C Power Adapter
A compatible USB-C PD wall charger rated at 25W or higher is recommended for the best performance when charging two devices. The wall adapter is not included.
Included 1m USB-C to USB-C charging cable
Required separately USB-C PD wall charger rated at 25W or higher
A low-powered USB port or incompatible adapter may result in slow charging, intermittent charging or failure to charge both devices together.
Three-Layer Charging Protection
Temperature protection Helps manage excessive operating temperature during wireless charging.
Short-circuit protection Helps protect the charging system against abnormal electrical conditions.
Foreign-object detection Detects certain interfering metal objects between the charger and device.
Some warmth is normal during wireless charging. Charging speed may reduce automatically as the phone warms, approaches a full battery or manages battery health.
At a glance.
- Green light flashes twice
- The charging stand has been connected to power.
- Solid green light
- The earbud charging area is actively charging a compatible case.
- Persistent flashing
- Abnormal charging condition or foreign object detected. Remove the device and check for metal objects, incorrect positioning or an incompatible case.
- In the box
- 1 × UGREEN MagFlow 2-in-1 wireless charging stand
1 × 1m USB-C to USB-C charging cable
1 × User manual
1 × Product tip card
USB-C wall charger is not included. Use a compatible 25W or higher USB-C PD adapter for best dual-device performance.
Questions buyers ask.
Is this a Qi2 wireless charger?
No. Model 90668 is a standard Qi magnetic wireless charging stand. It does not provide Qi2 15W or Qi2.2 25W charging to an iPhone.
Does it charge an iPhone at 15W?
No. Compatible iPhones charge at up to 7.5W. The 15W maximum applies only to selected compatible non-iPhone Qi devices.
Can it charge an iPhone and AirPods together?
Yes. The upper magnetic charger supports the iPhone while the lower pad charges a compatible Qi-enabled AirPods case.
Does it charge an Apple Watch?
No. The stand does not contain an Apple Watch charging module.
Does it include a power adapter?
No. It includes a 1m USB-C to USB-C cable, but the wall adapter must be purchased separately. A compatible USB-C PD adapter rated at 25W or higher is recommended.
Will it work through a phone case?
It works best with a bare compatible iPhone or a correctly aligned MagSafe-compatible case. Thick, non-magnetic or metal-containing cases can weaken attachment and interfere with charging.
Will it work with an Android phone?
Selected Qi-enabled Android phones can charge at up to 15W, depending on the model and protocol. A compatible magnetic case or charging ring is required to hold a phone that lacks built-in compatible magnets.
Does it support iPhone 16e?
The iPhone 16e supports Qi wireless charging but lacks a built-in MagSafe magnet array. A compatible magnetic charging case is required for secure attachment to this stand.
Which AirPods are compatible?
The AirPods case must support Qi wireless charging. AirPods supplied only with a wired charging case will not charge wirelessly. UGREEN specifically states that AirPods 1 are not supported by this model.
Can the phone rotate while attached?
Yes. The phone can be rotated through 360 degrees between portrait and landscape orientation, and the joint can be tilted to adjust the viewing angle.
Why is the green LED flashing continuously?
Persistent flashing indicates an abnormal charging condition. Remove the device and check for metal objects, an incompatible case, incorrect placement or an unsuitable power adapter.
Why is wireless charging slower than wired charging?
Wireless charging trades some speed and efficiency for placement convenience. Charging speed also changes with battery level, temperature, case thickness, alignment, adapter output and the phone’s charging controls.
Is it normal for the phone and charger to become warm?
Mild warmth is normal during wireless charging. Remove the device if excessive heat develops, and make sure no metal object, card or thick case is trapped between the phone and charger.
What warranty is included?
UGREEN India provides a one-year warranty for product 90668, subject to the applicable warranty terms and proof of purchase.
Purchase with confidence with genuine UGREEN products, GST invoice availability, one-year warranty support and assistance from our India-based team.