UGREEN Nexode Pro X757 25874 100W 3-Port GaN Charger, EU Plug
Overview
UGREEN X757 / 25874 is a 100W three-port GaN charger for laptops, tablets, phones and accessories. USB-C1 reaches up to 100W alone, USB-C2 reaches up to 30W alone, and USB-A reaches up to 22.5W alone. With C1 and C2 active, the charger provides 65W + 30W. With all three ports active, it provides 65W + 7.5W + 7.5W. This India SKU has fixed EU 2-pin pins; the electrical input is universal 100–240V, but mechanical socket compatibility must be checked separately.
What it does well.
Key features
Port map and connector roles
Port labels matter: USB-C1 is the only 100W output. USB-C2 is 30W-class and should not be mistaken for a second 100W port.
Charging protocols and speed logic
USB-C1 and USB-C2 support PD 3.0, PPS, QC 4+/3.0/2.0, SCP, FCP, AFC, Apple 5V/2.4A, Samsung 5V/2A and BC1.2 families. USB-A supports QC 3.0, SCP, FCP, AFC and common 5V fallbacks. Protocol availability remains constrained by the selected port and sharing table.
Compatible devices and systems
Compatibility rule: Universal input voltage does not mean universal plug shape. Verify both electrical rating and physical socket fit.
Use scenarios
Setup and usability guidance
No software required: Charging begins after the charger, cable and device negotiate a common USB power profile.
- Check the charger label, wall-supply range, plug shape and socket condition before connection. This SKU has fixed EU 2-pin pins.
- If a plug adapter is needed, use a secure, correctly rated certified adapter; a loose mechanical fit can create heat and intermittent power.
- Connect the charger directly to a sound wall socket, then attach the cable to the intended USB output and finally to the device.
- Use USB-C1 for the highest-power computer session and consult the power-sharing table before adding a second or third device.
- After use, unplug by holding the charger body rather than pulling on a charging cable.
Everyday usability and care
Keep the charger and any plug adapter dry and uncovered. Avoid hanging heavy cable bundles from the wall socket, and unplug by holding the charger body rather than pulling the cable.
What this product does
- Converts 100–240V AC mains input into negotiated USB charging outputs for compatible portable electronics.
- Provides one high-power USB-C path plus secondary USB-C and USB-A outputs from one wall connection.
- Automatically changes power distribution when additional ports are occupied.
- Works independently of operating system and requires no app or network connection.
What this product does not do
- It is not a voltage converter for non-USB appliances and does not create an AC outlet.
- Its USB ports provide power only; they do not transfer files, video or network data.
- It does not make an incompatible wall socket safe—plug fit and any adapter rating must be separately.
- It cannot make every occupied port retain its single-port maximum at the same time.
- It does not provide 100W from both USB-C ports or retain 100W on C1 when another output is occupied.
- Do not force the EU plug into an incompatible Indian socket or use a loose low-quality travel adapter.
What to do
- Use USB-C1 and a 5A e-marked cable for a compatible 100W USB-C session.
- Keep the charger uncovered with space around it for normal heat dissipation.
- Use a secure wall socket and a correctly rated plug adapter only where physically necessary.
- Check the device input specification and the sharing table before connecting several devices.
- Unplug before cleaning and wipe with a dry cloth.
- Use the included 100W cable on USB-C1 when a compatible laptop needs the maximum documented output.
What not to do
- Do not force the EU pins into an incompatible or loose socket.
- Do not use damaged cables, adapters, extension boards or wall sockets.
- Do not cover the charger, use it near liquids or trap it behind bedding or soft furnishings.
- Do not assume an ordinary 3A USB-C cable can deliver 100W; a suitable 5A e-marked cable is required.
- Do not disassemble the charger or continue use after swelling, cracking, odour, arcing or repeated shutdown.
- Do not assume the 100–240V input statement guarantees physical socket compatibility.
Warnings and limitations
Stop-use trigger: Disconnect immediately if you notice arcing, smoke, a burning smell, melted plastic, visible deformation or repeated unexplained power loss.
- The fixed EU 2-pin plug may not fit every Indian Type D or Type M socket securely. Use only a properly rated adapter when needed.
- High-power charging creates heat. Warmth can be normal, but excessive heat, smell, noise, deformation or cycling requires immediate disconnection.
- The charger and connected device negotiate power; the device may request less than the port maximum.
- Power is redistributed when a new port is occupied, which may briefly pause charging.
- The charger is for dry indoor use and is not a surge protector for the building supply.
- No India plug adapter is confirmed in the package. If your socket does not hold the EU pins securely, obtain a correctly rated certified adapter separately.
Troubleshooting
Useful diagnostic: If power is unstable, remove any plug adapter from the equation by testing in a secure compatible EU socket. A loose mechanical fit can mimic an electronic fault.
At a glance.
- USB-C1 alone
- Up to 100W.
- USB-C2 alone
- Up to 30W.
- USB-A alone
- Up to 22.5W.
- USB-C1 + USB-C2
- 65W + 30W.
- USB-C1 + USB-A
- 65W + 22.5W.
- USB-C2 + USB-A
- 15W shared, commonly 7.5W + 7.5W.
- All three ports
- 65W + 7.5W + 7.5W.
- In the box
- Confirm model X757 / SKU 25874 and GTIN 6941876228744.
Check whether the fixed EU 2-pin plug fits your socket securely.
Use a correctly rated plug adapter where required; none is confirmed in the box.
Remember that adding any second port reduces USB-C1 from 100W to 65W.
UGREEN India package: 1 × X757 / 25874 charger and 1 × 1.5m 100W USB-C to USB-C cable. A separate India plug adapter is not confirmed; retail documentation may also be present.