UGREEN 80392 2m VESA-Certified DisplayPort 1.4 Cable, 8K60/4K144
Overview
Graphics card to a 4K high-refresh gaming monitor; Workstation to an 8K or high-resolution professional display.
What it does well.
Key features
Highlights
length. 2m; buy by the real route rather than a family length.
Connector fit. Full-size DisplayPort male to full-size DisplayPort male
Video target. Up to 8K at 60Hz, 4K at 144Hz or 1440p/2K at 240Hz on compatible equipment
Published signal rate. Up to 32.4Gbps raw DisplayPort 1.4 link rate
Signal direction. No Source/Display orientation is published; connect a DisplayPort output to a DisplayPort input
Construction. Nylon-braided jacket, reinforced joints, gold-plated contact wording and shielded copper construction are shown or stated on the official sources. The India page specifically notes that this model has no locking clip.
How to read the video rating
Model guidance
Cable ceiling and actual device result are different. The India title and official family page establish 4K144; the India body also lists 8K60 and 2K240. DSC and compatible ports are required for demanding mode combinations.
- Model guidance: Up to 8K at 60Hz, 4K at 144Hz or 1440p/2K at 240Hz on compatible equipment.
- Published rate: Up to 32.4Gbps raw DisplayPort 1.4 link rate.
- Both devices need full-size DisplayPort. The requested mode must be supported by the graphics output, display input, driver and monitor settings.
- A dock, KVM, receiver, switch, splitter, adapter, coupler, wall plate or extra cable can lower the final mode.
Audio and display features
Functions, plainly explained
VESA-certified 80392/80393 cable family. For this SKU or its official model family; connected equipment must support it.
DisplayPort 1.4 / HBR3 link. Requires compatible source, display and settings.
DSC 1.2 support for bandwidth-intensive modes. Requires compatible source, display and settings.
Dynamic HDR and HDCP 2.2 pass-through as listed. Requires compatible source, display and settings.
Digital audio including listed 2.0, 5.1 and 7.1 channel formats. Requires compatible source, display and settings.
Mirror, extended and compatible MST/splicing use. Requires compatible source, display and settings.
A cable cannot upscale content, generate frames or add a feature absent from the source or display.
Construction and routing
Model guidance
Build and handling guidance. Nylon-braided jacket, reinforced joints, gold-plated contact wording and shielded copper construction are shown or stated on the official sources. The India page specifically notes that this model has no locking clip.
- No Source/Display orientation is published; connect a DisplayPort output to a DisplayPort input
- Plan a relaxed route and protect both connector housings from sideways pull.
- Test the intended mode before the route becomes hard to access.
- Do not infer an in-wall, plenum, LSZH or fire rating unless it is printed on the supplied cable.
Use scenarios
Practical examples
Home and media. Graphics card to a 4K high-refresh gaming monitor
Work and presentation. Workstation to an 8K or high-resolution professional display
Gaming or specialist display. Desktop or dock to an ultrawide DisplayPort monitor
Longer-term setup. Supported MST or multi-display workflow within the source bandwidth
Setup and usability guidance
Connect • configure • verify
After setup, use the display information screen or operating-system display panel to confirm the resolution, refresh rate, HDR state and active audio device actually negotiated.
- Step 1: Connect the graphics output to the monitor DisplayPort input.
- Step 2: Select DisplayPort 1.4 or the enhanced mode in the monitor menu if required.
- Step 3: Install the current GPU driver, then select resolution, refresh rate, colour depth and HDR.
- Step 4: Enable adaptive sync only after confirming a stable base mode.
- Step 5: For MST, check the GPU, operating system and monitor output-port support before building a chain.
Compatible devices and systems
Model guidance
Match connector shape, signal direction and port capability.
Examples do not guarantee every generation or port reaches the cable ceiling; check both device manuals.
- NVIDIA, AMD and Intel graphics outputs with full-size DisplayPort
- Desktop PCs, workstations, compatible laptops and docks with DisplayPort output
- DisplayPort monitors, gaming displays, ultrawide screens, projectors and professional panels
- Backward operation with DisplayPort 1.3, 1.2 and 1.1 equipment at the mutually supported mode
Check before buying
Avoid the common mismatch
- The route suits 2m, including connector clearance and relaxed service slack.
- The ports match: Full-size DisplayPort male to full-size DisplayPort male.
- Use one plug at the source DisplayPort output and the other at the receiving DisplayPort input. This is not a DisplayPort-to-HDMI or USB-C conversion cable.
- Both devices need full-size DisplayPort. The requested mode must be supported by the graphics output, display input, driver and monitor settings.
- The desired mode stays within: Up to 8K at 60Hz, 4K at 144Hz or 1440p/2K at 240Hz on compatible equipment.
- Any intermediate device supports the same video, audio and content-protection requirements.
What this product does
Scope and limitations
- Provides a 2m full-size DisplayPort-to-DisplayPort link.
- Carries compatible digital video and audio up to the cable ceiling.
- Passes DSC, HDR, HDCP and adaptive-sync signals when the complete system supports them.
- Supports mirror, extended and compatible MST workflows as transport.
- It does not convert DisplayPort to HDMI, USB-C, DVI or VGA.
- It does not make an older source or monitor support DP 1.4 modes.
- It does not create FreeSync, G-SYNC or MST on unsupported hardware.
- It does not have a DisplayPort locking clip on this model.
What to do
Care and installation practice
- Confirm both ports are full-size DisplayPort.
- Use the latest stable graphics driver and monitor firmware where applicable.
- Test the intended mode directly before adding a KVM, dock or adapter.
- Release the plug straight out; do not twist or lever the connector.
- Do not force the plug into HDMI or another similarly shaped socket.
- Do not assume 8K60 or 4K144 without checking DSC and port support.
- Do not sharply kink, crush, pull or staple the cable.
- Do not expect the cable alone to eliminate every black-screen or handshake issue.
Warnings and limitations
Read before use
Capability limit. Actual resolution and refresh are limited by the lowest-capability device and selected colour format.
Compatibility caution. A dock, KVM, coupler, adapter or MST chain can reduce available bandwidth.
Gallery or claim conflict. The gallery contains a broader refresh chart than the India body; this page uses the title plus official family evidence and avoids unsupported 4K240 wording.
Installation warning. No in-wall, plenum, LSZH or fire rating is claimed.
At a glance.
- Brand
- UGREEN
- SKU
- 80392
- Product type
- DisplayPort 1.4 male-to-male cable
- Cable length
- 2 metres
- Connectors
- Full-size DisplayPort male to full-size DisplayPort male
- Direction
- No Source/Display orientation is published; connect a DisplayPort output to a DisplayPort input
- Video guidance
- Up to 8K at 60Hz, 4K at 144Hz or 1440p/2K at 240Hz on compatible equipment
- Published bandwidth / rate
- Up to 32.4Gbps raw DisplayPort 1.4 link rate
- Construction
- Nylon-braided jacket, reinforced joints, gold-plated contact wording and shielded copper construction are shown or stated on the official sources. The India page specifically notes that this model has no locking clip.
- Feature support
- VESA-certified 80392/80393 cable family, DisplayPort 1.4 / HBR3 link, DSC 1.2 support for bandwidth-intensive modes, Dynamic HDR and HDCP 2.2 pass-through as listed, Digital audio including listed 2.0, 5.1 and 7.1 channel formats, Mirror, extended and compatible MST/splicing use
- Display standard
- DisplayPort 1.4 / HBR3
- Compression
- Display Stream Compression 1.2 support
- Content protection
- HDCP 2.2 listed
- Audio
- Digital audio pass-through; listed 2.0, 5.1 and 7.1 channel formats
- Connector latch
- No locking clip, as stated on the India page
- In the box
- 1 × UGREEN 80392 2m DisplayPort 1.4 male-to-male cable
model reference
In the box
Shown devices and accessories are not included. Confirm SKU 80392 and 2m before routing.
Questions buyers ask.
What is the video guidance for UGREEN 80392?
Up to 8K at 60Hz, 4K at 144Hz or 1440p/2K at 240Hz on compatible equipment. The India title and official family page establish 4K144; the India body also lists 8K60 and 2K240. DSC and compatible ports are required for demanding mode combinations.
Is the cable directional?
Use one plug at the source DisplayPort output and the other at the receiving DisplayPort input. This is not a DisplayPort-to-HDMI or USB-C conversion cable.
What ports and source capability are required?
Full-size DisplayPort male to full-size DisplayPort male. Both devices need full-size DisplayPort. The requested mode must be supported by the graphics output, display input, driver and monitor settings.
Will every compatible-looking device reach the maximum mode?
No. The source hardware, port version, graphics driver, operating system, display input, selected colour format and every intermediate device determine the negotiated result.
Does it need a driver or separate power adapter?
No separate cable driver or external power adapter is listed. The host graphics system may still need the correct driver and display settings.
Is SKU 80392 VESA certified?
Does the cable have a locking clip?
No. The India product page specifically states that this model does not come with a clip lock.
What should I check if there is no picture?
Verify connector direction and port type, select the correct display input, reseat both ends, test a direct connection, lower the resolution/refresh rate, and restart or update the graphics system if needed.
Can it be routed inside a wall or ceiling?
No concealed-installation rating is claimed here. Check the physical cable markings and local installation requirements before any in-wall, ceiling or conduit route.
What is included in the package?
1 × UGREEN 80392 2m DisplayPort 1.4 male-to-male cable. Devices, adapters and cable-management accessories shown in use images are not included.