UGREEN 1m Active DisplayPort to HDMI Cable, 4K60 (15773)
Overview
The buying decision begins with the interfaces and application, not the largest printed number. Confirm that the physical ports, protocol, device software and complete route match this model.
What it does well.
Key features
Product highlights
1m. Format and length for planning the physical connection.
DP source → HDMI display. Product capability, subject to the complete source-to-display path.
4K60 · 2K60 · 1080p120. The defining connector, protocol or construction detail for this SKU.
One clear job. Actively converts one full-size DisplayPort source output to one HDMI display input.
No hidden upgrade. It does not work from an HDMI source to a DisplayPort monitor.
Maximum versus actual: artwork supports 4K at 60Hz, “2K” at 60Hz and 1080p at 120Hz. The performance artwork, not broader title/body phrases, controls this page: 2K144 and 1080p240 are excluded. HDR and compatible audio depend on source, display, content and settings.
Choose the right connection
Port and direction check
Full-size DisplayPort male source plug to HDMI Type-A male display plug, integrated 1m active cable
Inspect port labels and connector shapes under good light before routing. Mini HDMI, Micro HDMI, Mini DisplayPort, full-size DisplayPort, USB-C, VGA and full-size HDMI are distinct interfaces even when two connectors appear similar at a glance.
Connection rule: never force a plug and never assume an adapter works in reverse or adds a display mode, audio format or protocol that the endpoints lack.
Display modes and performance
Resolution, refresh and signal
A maximum resolution or refresh rate is not forced by the product. The source GPU, source port, adapter or cable, receiving input and every intermediate device must negotiate a mode they all support.
When a high mode fails, establish a stable direct connection at a conservative timing, then raise one setting at a time while checking picture, colour and audio.
Use scenarios
Where it fits
Graphics card to 4K television. Drive one compatible HDMI television from a full-size DisplayPort graphics output up to the 4K60 ceiling.
High-refresh Full HD monitor. Use 1080p120 when the graphics output and HDMI display input both support that combination.
Workstation second display. Attach one HDMI monitor to an available full-size DisplayPort output and choose extend mode.
Projector presentation. Send compatible digital picture and audio to an HDMI projector from a DisplayPort computer.
Home-theatre playback.
Multi-monitor workstation. Use one cable per display and one capable DisplayPort output per cable; the GPU controls the total number and arrangement.
Scenario boundary: every example assumes the actual source output, signal direction, receiving input, graphics hardware and operating system support the requested use.
Setup and usability guidance
A reliable first connection
Follow a controlled sequence so connector, direction, display-mode and audio faults remain easy to isolate.
After setup: record the working input, resolution, refresh and audio route before adding more adapters, joins or switching equipment.
- Confirm the source has a full-size DisplayPort video output and the receiving device has an HDMI Type-A input.
- Connect the full-size DisplayPort plug to the computer or graphics card; use its retention mechanism correctly if present.
- Connect the HDMI Type-A plug to the receiving display and select that HDMI input.
- Begin at 1080p60, confirm a stable image and compatible audio, then raise the mode within the combinations.
- Enable HDR only when source, display, content and operating-system settings all support it.
- For several screens, repeat with separate cables and capable graphics outputs rather than splitting this connection.
Compatible devices and systems
Compatibility explained
Required source side.
Required display side.
System behaviour.
Important boundaries.
- Full-size DisplayPort video output on a desktop, workstation, dock or graphics card
- The source port must provide video output, not merely share a similar connector shape
- Graphics hardware and system settings must support the requested display mode
- HDMI Type-A input on a monitor, television, projector or compatible AV device
- The selected display input must be enabled and support the chosen timing
- Any separately required cable must be sound and correctly rated
- No product-specific application is required for ordinary display use
- Mirror and extended-desktop choices are controlled by the source operating system
- Resolution, refresh, colour, HDR and audio options depend on the complete signal chain
- Not HDMI-source to DisplayPort-display
- Not Mini DisplayPort or USB-C at the source
- Typical HDMI-source consoles and Switch cannot use this cable as their output lead
- One cable drives one display; multi-screen layouts require additional outputs and cables
What this product does
Supported jobs
Use SKU 15773 for these roles.
Each role stays within the product category described above; it does not imply conversion, amplification, routing or software support that is not listed.
- Actively converts one full-size DisplayPort source output to one HDMI display input.
- Provides a complete 1m male-to-male cable without a separate HDMI lead.
- Carries compatible digital audio, including listed 2.0/5.1/7.1-channel paths when endpoints support them.
- Carries HDR signalling when the entire source-to-display path supports it.
- Allows one screen to mirror or extend the desktop under source graphics control.
What this product does not do
Important exclusions
These exclusions prevent the most common wrong-product purchases and unsafe installations.
Choose another product when needed: use the correct directional converter, splitter, switch, capture device, audio route or installation-rated cable for functions outside this model’s role.
- It does not work from an HDMI source to a DisplayPort monitor.
- It does not support or promise 2K144 or 1080p240 on this cleaned page.
- It does not add VRR, FreeSync, G-SYNC, DSC, eARC or a guaranteed HDCP version.
- It does not turn HDMI-output consoles or Nintendo Switch into DisplayPort sources.
- It does not drive six displays from one cable; each screen requires its own capable output and cable.
- It does not fit Mini DisplayPort or USB-C source sockets.
What to do
Best-practice checklist
Protect the connection and make later diagnosis straightforward.
A labelled, supported and tested connection is easier to maintain than one hidden immediately after purchase.
- Identify both physical ports and confirm which device is the source before connecting anything.
- Start with a conservative display mode, then raise resolution or refresh only after a stable picture is established.
- Insert and remove connectors by their housings, keeping the lead free of tension and sharp bends.
- Select the intended input on the monitor, television or projector after the cable path is complete.
- Test the direct, shortest supported path before adding switches, wall plates, extensions or capture equipment.
- Keep the product dry, ventilated and accessible enough to inspect if picture or audio changes.
What not to do
Avoid these mistakes
Most failures come from wrong interfaces, unsupported claims, strain or uncontrolled channel changes.
Stop using the product if a connector, housing, jacket or lead is cracked, loose, contaminated, unusually hot or exposes conductive parts.
- Do not force a connector into a similar-looking port or use a direction opposite to the one stated for this model.
- Do not pull, kink, crush, staple or allow the cable or adapter to hang by either device port.
- Do not assume the maximum printed mode will work through an older source, display, cable or intermediate device.
- Do not hot-plug repeatedly while diagnosing; power-cycle the source and display after reseating the path.
- Do not install the product outdoors, underground or permanently inside a wall without the required published rating.
- Do not continue using damaged, loose, contaminated or unusually hot connectors or housings.
Warnings and limitations
Read before installation
The following limits remain important even when the connector appears to fit.
Permanent routes: test the complete real setup first and follow local electrical, building and workplace requirements.
- A printed maximum is a ceiling, not a forced mode. The source, graphics hardware, adapter or cable, receiving display and every intermediate connection must share the requested resolution and refresh rate.
- Direction is fixed: DisplayPort source output to HDMI display input. Reverse use is unsupported.
- Multi-monitor totals depend on the GPU, driver, operating system, output count and a separate cable for every display.
- Typical consoles and Switch expose HDMI output and therefore cannot serve as the source for this directional cable.
- No outdoor, direct-burial, in-wall, plenum, LSZH or fire-resistance rating is stated for this product.
At a glance.
- Source connector
- Full-size DisplayPort male
- Display connector
- HDMI Type-A male
- Cable length
- 1m
- Conversion
- Active full-size DisplayPort source to HDMI display
- Conductors / jacket
- Pure-copper-core wording and black cotton-mesh braid
- Connector housings
- Aluminium-alloy active housings with nickel-plated connector wording
- External power
- No separate connector stated
Physical build
What is in the pack
Included only as stated for this current product record.
Included only as stated for this current product record.
Source devices, displays, separately required HDMI, VGA or audio cables, wall plates, switches, receivers and installation hardware are not included unless individually listed above. Inspect the retail package before installation.
Questions buyers ask.
Which direction does UGREEN 15773 work?
Full-size DisplayPort output on the source to HDMI Type-A input on the receiving display only.
Can I connect an HDMI laptop or console to a DisplayPort monitor?
No. HDMI-source to DisplayPort-display conversion is the reverse direction and requires a different active adapter.
What 4K mode is supported?
What “2K” and 1080p modes are claimed?
Why are 2K144 and 1080p240 excluded?
Does it carry audio?
Yes, compatible digital audio can pass with the video, including listed 2.0/5.1/7.1-channel paths when both endpoints support the format.
Does it support HDR?
HDR wording appears in the current record, but source, display, content, selected mode and settings must all support it.
Does it support VRR, FreeSync or G-SYNC?
No such claim is safely established for this product, so variable-refresh operation is not promised.
Can one cable drive several displays?
No. One cable drives one HDMI display. Each additional display needs a separate capable graphics output and cable.
Will it work with PlayStation, Xbox or Nintendo Switch as the source?
Not in their usual HDMI-output role. This cable requires a full-size DisplayPort source output.
Will it fit a MacBook or USB-C laptop?
Only if the device or dock has a full-size DisplayPort video output. It does not plug into USB-C or Mini DisplayPort.
What is included?
1 × UGREEN 1m active DisplayPort-to-HDMI cable (SKU 15773) 1 × reusable cable tie, as stated on the current record