UGREEN US184 USB-A to USB-C 5Gbps Cable, 1.5m (20883)
Overview
SKU 20883 is the 1.5m member of the US184 family. Length matters: choose enough reach without leaving a loose coil beside moving chairs, warm chargers or vehicle controls.
- cable length
- USB 3.0 data with compatible endpoints
- compatible USB-A charging; not USB-C PD
- intended physical connection
What it does well.
Key features
The defining functions of this SKU are separated from headline marketing so connector roles, power, data, length and battery limits remain clear.
- 1.5m fixed cable with USB-A male and USB-C male connectors.
- USB 3.0/USB 3.2 Gen 1-class signalling up to 5Gbps when both ports and the connected device support that rate.
- Charging current up to 3A from a compatible USB-A charger or host; the receiving device decides the accepted current and voltage.
- Supports common USB-A charging families such as QC, AFC or FCP only when the charger and device implement the same mode.
- A 56kΩ pull-up resistor is identified for the family to support the USB-A-to-USB-C connection role.
- 5300+ bend-test is the gallery flex-test claim; it is a laboratory claim, not permission to fold or crush the cable.
Performance and planning
Headline watts and gigabits are negotiated maximums, not universal results. Plan around every device, port, cable, charger, battery state and protocol in the path.
The 5Gbps figure is a theoretical interface maximum. A USB 2.0 host, USB 2.0 device, slow storage medium, file-system overhead, thermal throttling or an intervening adapter can reduce real transfer speed to 480Mbps-class or below.
The 1.5m run stays within this model’s listed data role, but cable routing still matters. Avoid tight coils with mains leads, high-current adapters or sharp metal edges, and do not add unverified extensions.
Up to 3A does not mean a fixed wattage. A legacy 5V USB-A source may provide much less, while supported proprietary charging modes may raise voltage. The source and device negotiate the final profile.
A laptop USB-A port is normally designed for peripherals and may charge a phone slowly. It is not a USB-C laptop-charging output and should not be expected to power a USB-C notebook.
Use scenarios
These practical examples keep the connector direction, supported protocol and safety limits in view.
Portable storage. Connect a compatible USB-C SSD, enclosure or card reader to a USB-A 3.x computer port. Verify the storage device’s power demand and safely eject it before unplugging.
Phone data and charging. Link a USB-C phone or tablet to a USB-A computer for file transfer, backup and negotiated charging after unlocking the device and approving the data prompt.
Vehicle connection. Use a vehicle’s supported USB-A data port with a USB-C phone for Android Auto or media only when the vehicle and phone explicitly support that function.
USB-A wall charging. Charge a USB-C device from a compatible USB-A charger. Speed is limited by the shared charging protocol and can be far below modern USB-C PD rates.
Setup and usability guidance
Use this sequence for a controlled first connection. Follow the connected-device maker’s stricter instruction whenever it differs.
- Plan the 1.5m route with gentle bends, connector clearance and no tension at either port.
- Inspect both ports for lint, moisture or damage, and confirm the source is USB-A while the receiving device is USB-C.
- For data, connect the USB-A end directly to a USB 3.x host port where possible, then connect the USB-C end to the peripheral.
- Unlock a phone or tablet and approve its USB/file-transfer prompt. For storage, wait for the drive to mount before starting a large transfer.
- For charging, confirm the source and device support a common USB-A charging mode; observe temperature during the first session.
- Safely eject mounted storage, stop active transfers and disconnect by gripping each connector shell rather than pulling the cable.
Compatible devices and systems
A connector that fits is only the first check. The host, accessory, operating system and power source must support the requested function.
- USB-A desktop and laptop computers with USB 3.x ports, with fallback to the lower speed of a USB 2.0 host.
- USB-C phones and tablets that accept charging or data from a USB-A host. File access may require unlocking, a trust prompt or the maker’s transfer setting.
- Bus-powered USB-C SSDs, enclosures, cameras and card readers only when their power requirement stays within the host port’s available output.
- Supported vehicle USB-A data ports and USB-C phones for Android Auto or media; a charge-only vehicle port cannot become a data port through this cable.
- USB-A chargers and compatible USB-C devices using a mutually supported legacy/QC/AFC/FCP charging mode.
- Windows, macOS, ChromeOS, Linux, Android and other systems at the cable layer; drivers, storage formats and application support remain device-specific.
What this product does
These are the supported functions of this product when the complete connection is compatible.
- Carries USB data between a USB-A host and a compatible USB-C device.
- Supports a theoretical data rate up to 5Gbps with USB 3.x-capable endpoints.
- Carries compatible USB-A charging current up to 3A.
- Provides a fixed male-to-male connection without a separate adapter.
- Falls back to the lower capability of either connected endpoint.
What this product does not do
These exclusions distinguish this SKU from visually similar cables, chargers, hubs, audio products and power stations.
Choose by function: If the required task appears in this exclusion list, select a purpose-built cable, charger, adapter or power product with the needed interface and rating.
- Does not support USB-C Power Delivery or PPS negotiation from a USB-C source.
- Does not charge a USB-C laptop at its normal USB-C PD wattage.
- Does not carry DisplayPort Alt Mode, HDMI, Thunderbolt or USB4 video.
- Does not turn a charge-only USB-A port into a data-capable port.
- Does not guarantee 5Gbps with USB 2.0 ports, slow media or incompatible software.
- Does not act as an OTG adapter for attaching a USB-A male peripheral plug; both ends of this cable are male.
What to do
These habits support reliable charging, data, audio and battery use while reducing avoidable connector strain.
- Use a direct USB 3.x host port for the best chance of 5Gbps-class transfer.
- Leave a relaxed service loop near devices that move, but avoid a tight powered coil.
- Keep the connector shells aligned and fully seated without forcing either orientation.
- Back up important storage before long transfers and safely eject removable drives.
- Use a charger and device that share the same charging protocol when speed matters.
- Label the cable length and role in a shared workstation so it is not mistaken for a display or PD cable.
What not to do
Avoid these common mistakes even when the plug appears to fit.
- Do not use this cable between two USB-C ports; it has a USB-A connector at the source end.
- Do not connect two power sources or attempt improvised male-to-male power arrangements.
- Do not force the USB-A plug into a damaged or obstructed receptacle.
- Do not run it under chair wheels, doors, rugs or hot equipment.
- Do not unplug storage while a write, backup, update or file-system repair is active.
- Do not infer video support from the blue USB-A insert or the USB-C plug.
Warnings and limitations
Review these electrical, thermal, transport and physical limits before connecting valuable equipment.
Stop and recheck: Disconnect power if a connection becomes loose, wet, damaged, swollen, unstable or unusually hot. Never keep reconnecting equipment that shows a safety warning.
- Stop using the product if a connector, cable jacket, battery enclosure or plug is bent, cracked, loose, swollen, scorched or unusually hot.
- Keep connectors dry and free of lint or metal debris. Disconnect power before cleaning; never probe a port with metal.
- Never modify, splice, crush or tightly knot a charging cable, charger or battery pack.
- A bus-powered SSD or enclosure can disconnect if the USB-A port cannot provide enough stable power; use a supported powered arrangement instead of repeatedly reconnecting.
- Vehicle USB ports vary widely. Route the cable away from pedals, steering controls, gear selectors and sharp trim.
- Proprietary fast charging and 3A are conditional maximums; unexpected heat, cycling or dropouts require a lower-power source and inspection.
Check before ordering
Confirm connector direction, required protocol, power profile, cable length and package needs before choosing by appearance.
- Confirm 1.5m is enough for the planned route without tension and is not unnecessarily long for a confined space.
- Confirm the source has a USB-A receptacle and the receiving device has USB-C.
- Confirm both endpoints support USB 3.x if 5Gbps-class data is required.
- Confirm the USB-A source can provide the current and charging protocol the device needs.
- Choose USB-C-to-USB-C instead if USB Power Delivery or USB-C laptop charging is required.
- Choose a certified display/Thunderbolt/USB4 cable instead if video or high-bandwidth docking is required.
Care and troubleshooting
Disconnect power before inspection and change one variable at a time when diagnosing a connection.
- Disconnect both ends and wipe the jacket and connector shells with a soft dry cloth. Do not spray cleaner into a port.
- Store the 1.5m cable in a loose loop wider than a closed hand; do not make a tight knot around a charger.
- Treat the 5300+ bend-test gallery statement as a controlled flex-test claim, not a guarantee against crushing, pets, repeated sharp folding or connector-side leverage.
- If data falls back, connect directly to a known USB 3.x port, remove hubs or adapters, test another compatible device and confirm that the storage itself is fast enough.
- If charging is slow, compare the charger profile, host-port current, device state, background load and connector cleanliness before assuming a cable fault.
- If a drive disconnects, stop writes, try a supported higher-power host port and do not keep using a loose or overheating connection.
At a glance.
- Brand / model family
- UGREEN US184
- SKU
- 20883
- Cable length
- 1.5m
- Connectors
- USB-A male to USB-C male
- USB data class
- USB 3.0 / USB 3.2 Gen 1-class; backward compatible
- Maximum theoretical data rate
- Up to 5Gbps with compatible USB 3.x endpoints
- Maximum listed charging current
- Up to 3A with compatible USB-A source and USB-C device
- USB-C Power Delivery
- Not supported; source connector is USB-A
- Video / DP Alt Mode
- Not supported
- Conductor / shielding
- Tinned-copper conductors with shielding; family artwork lists 28/22AWG construction
- Jacket
- Black PVC
- Identification resistor
- 56kΩ pull-up listed for the US184 family
- Direction and roles
- USB-A host/source to USB-C device/peripheral
- Operating-system requirement
- No cable driver; device drivers, permissions and file systems may be required
- In the box
- 1 × UGREEN US184 USB-A to USB-C cable, 1.5m, SKU 20883.
A wall charger, USB hub, storage device, phone, vehicle interface and USB-C PD adapter are not identified as included.
Model specifications are consolidated below. Maximum values remain conditional on the complete negotiated connection.
Only components supported by the model record or an official model package list are included here. Scene devices and props are excluded.
Questions buyers ask.
How long is SKU 20883?
this SKU is 1.5m. Related US184 lengths are separate products and should not be substituted in the title or specifications.
Can it transfer at 5Gbps?
Up to 5Gbps is the theoretical USB 3.x maximum when the USB-A host, USB-C device, storage and software all support it. The connection falls back to the slowest component.
Does it support USB-C Power Delivery?
No. USB-C PD negotiation requires the appropriate USB-C source path; this cable begins with USB-A.
How fast can it charge?
The family is listed up to 3A. Actual voltage, current and wattage are set by the USB-A source, shared charging protocol, device and battery state.
Can it charge a USB-C laptop?
Not at normal USB-C PD laptop wattage. Use the laptop maker’s rated USB-C PD charger and a suitable USB-C-to-USB-C cable.
Does it carry video to a monitor?
No. It does not provide DisplayPort Alt Mode, HDMI, Thunderbolt or USB4 video.
Can I use it with an external SSD?
Yes when the SSD or enclosure has USB-C, the computer has USB-A, and the host port can provide enough power. Safely eject before unplugging.
Will it work for Android Auto?
It can when the car’s USB-A port supports Android Auto data and the phone uses USB-C. A charge-only vehicle port remains charge-only.
Is a charger included?
No wall charger is identified as included; the package is the cable itself.
Does the operating system need a cable driver?
No cable driver is normally needed, but the attached device may need drivers, permissions, a trust prompt or compatible storage formatting.
Why am I seeing USB 2.0 speed?
One endpoint, hub, adapter or device may be USB 2.0, or the storage may be the bottleneck. Connect directly and verify every link.
What should I do if the connector becomes hot or loose?
Disconnect it, inspect both ports and stop using any damaged part. Do not keep reconnecting a loose, contaminated or overheating port.