JBL ONBEATBLKEU Bluetooth Multimedia Loudspeaker Dock For iPad, iPod & iPhone

• Carefully unpack your speaker dock, and confirm that all the items shown here are included: JBL® OnBeat speaker dock, power supply, AC cord*, remote control, iPod®/iPhone® adapter clip and iPad™ adapter clip.

• Connect a USB Type Mini B cable (not included) to the JBL OnBeat speaker dock USB port and to a USB port on the computer on which your iTunes library is located. This allows you to sync a docked iPod/ iPhone/iPad device with iTunes®.

• If you are going to use your JBL OnBeat speaker dock with another audio source, plug one end of a 3.5mm (1/8") stereo cable (not included) into the JBL OnBeat speaker dock Audio In connector, and plug the other end into the audio source’s audio out or headphone out connector.

• IMPORTANT: If you play audio through a docked iPod, iPhone or iPad device and an audio source connected to the Audio In connector at the same time, you will hear both of their outputs mixed through the JBL OnBeat speaker dock. To hear only one source, you will need to turn off the other source (the one you do not want to hear) manually.

• If you want to view videos or photos from your iPod, iPhone or iPad device on a TV, plug one end of a composite video cable (not included) into the JBL OnBeat speaker dock Video Out connector, and plug the other end into your TV’s composite video input connector.

• When you dock your iPod, iPhone or iPad device on the JBL OnBeat speaker dock, its video output will automatically be set to off, even if it was turned on before you docked the device. To turn the JBL OnBeat speaker dock video output on, press the remote’s Menu button for at least two seconds. The JBL OnBeat speaker dock status LED will flash once. The video from the iPod, iPhone or iPad device will play on the connected TV. To turn the video output off, press the remote’s Menu button again for at least two seconds. The JBL OnBeat speaker dock status LED will flash twice. DC IN POWER AUDIO IN USB VIDEO OUT Composite Video.

• Insert the included AC cord all the way into the power supply (if there is more than one AC cord, use the correct one for your region). Then connect the power supply into the JBL OnBeat speaker dock DC In connector and plug it into an AC wall outlet.

• Your JBL OnBeat speaker dock includes two adapter clips: one for an iPod touch®/iPod classic®/iPhone device, and another for an iPad device (NOTE: the iPod 5G and iPod nano® models do not require an adapter clip.) The adapters allow you to dock units with or without third-party skins attached. Attach the appropriate adapter clip to the JBL OnBeat speaker dock.

• Place your iPod/iPhone/iPad device on the docking connector. Make sure the device is inserted all the way onto the connector. Press the top of the iPod/iPhone/iPad device all the way back into the adapter clip or against the dock to secure it in the dock.

• To turn the JBL OnBeat speaker dock on, press the Power button on the REMOTE CONTROL FUNCTIONS unit. The unit’s status LED will glow white when the system is on. To turn the JBL OnBeat speaker dock off, press the Power button on the unit again. The status LED will turn off.

• To place the JBL OnBeat speaker dock into the Standby mode while an iPod, iPhone or iPad device is docked, hold down the Play/Pause button on the remote for two seconds. The status LED will glow amber when the unit is in the Standby mode. To turn the JBL OnBeat speaker dock from Standby to on, press any button on the unit or remote control.

• The JBL OnBeat speaker dock will automatically enter the Standby mode whenever no control buttons have been pressed and no audio signal has been present for 10 minutes. The status LED will glow amber.

• Adjust the volume using the (+) and (–) buttons. Press both buttons simultaneously to mute the sound; press either button to unmute the sound.

ROTATING THE DOCK

When an iPod or iPhone device is docked in the JBL OnBeat speaker dock, you can rotate the dock to the landscape mode. IMPORTANT: You cannot rotate the dock when an iPad device is docked.

To rotate the dock to the landscape mode, turn it 90 degrees counterclockwise. To rotate it back to the portrait mode, turn it 90 degrees clockwise. The dock will hold in place at the portrait and the landscape positions

SYNCHRONIZING WITH YOUR iTunes LIBRARY NOTE:

Before attempting to synchronize your iPod/iPhone/iPad device with your iTunes library, be sure that both your iPod/iPhone/iPad device and your iTunes library are updated to the latest software version. Before attempting to synchronize, be sure that the JBL OnBeat speaker dock USB port is connected to the computer on which your iTunes library is located.

1. Place your iPod/iPhone/iPad device on the JBL OnBeat speaker dock docking connector. Make sure the iPod/iPhone/iPad device is inserted all the way onto the connector.
2. Use your computer’s iTunes software to synchronize the iPod/ iPhone/iPad device with the iTunes library.
3. When you’re finished synchronizing, eject the iPod/iPhone/iPad device from the iTunes library.

CHARGING A DOCKED:

IPod/iPhone/iPad DEVICE the JBL OnBeat speaker dock will charge your iPod or iPhone device whenever it is docked.

NOTE: The JBL OnBeat speaker dock may not charge a docked iPad device via the USB connection to a PC. If the iPad device charges when it is connected directly to the PC via USB, it will charge while docked on the JBL OnBeat speaker dock. If the iPad device does not charge when it is connected directly to the PC via USB, it will not charge while docked on the JBL OnBeat speaker dock.